feat: raspberry flavoured sleep

configureddefaults/config/betterdays-client.toml

@@ -0,0 +1,19 @@
+
+[gui]
+	#Sets the screen alignment of the bed clock.
+	#Allowed Values: TOP_LEFT, TOP_CENTER, TOP_RIGHT, CENTER_LEFT, CENTER_CENTER, CENTER_RIGHT, BOTTOM_LEFT, BOTTOM_CENTER, BOTTOM_RIGHT
+	clockAlignment = "TOP_RIGHT"
+	#Sets the scale of the bed clock.
+	#Range: > 1
+	clockScale = 32
+	#Sets the distance between the clock and the edge of the screen.
+	#Unused if clockAlignment is CENTER_CENTER.
+	#Range: > 0
+	clockMargin = 16
+	#This setting prevents clock wobble when getting in bed by updating the clock's position every tick.
+	#As a side-effect, the clock won't wobble when first viewed as it does in vanilla. This setting is
+	#unused if displayBedClock is false.
+	preventClockWobble = true
+	#This setting blacklists the sky rendering for specific dimensions. Like in the Aether if using /time set command, the sky jitters. Adding to the blacklist will prevent this behavior.
+	blacklistDimensions = ["aether:the_aether"]
+

configureddefaults/config/betterdays-common.toml

@@ -0,0 +1,192 @@
+
+[time]
+	#The speed at which time passes during the day.
+	#Day is defined as any time between dayStart (see below) and nightStart (see below) the next day.
+	#This is the RATIO of time passing relative to vanilla.
+	#Vanilla speed: 1.0
+	#Range: 0.0 ~ 24000.0
+	daySpeed = 0.7
+	#The speed at which time passes during the night.
+	#Night is defined as any time between dayStart (see below) and nightStart (see below).
+	#This is the RATIO of time passing relative to vanilla.
+	#Vanilla speed: 1.0
+	#Range: 0.0 ~ 24000.0
+	nightSpeed = 0.7
+	#An alternative way to set day speed. This setting is mutually exclusive with daySpeed.
+	#If both are set, speedMethod (see below) determines which setting is used.
+	#This setting defines the length of the day in real-world minutes.
+	#Vanilla length: 10.0 minutes
+	#Range: 0.1 ~ 10000.0
+	daySpeedMinutes = 10.0
+	#An alternative way to set night speed. This setting is mutually exclusive with nightSpeed.
+	#If both are set, speedMethod (see below) determines which setting is used.
+	#This setting defines the length of the night in real-world minutes.
+	#Vanilla length: 10.0 minutes
+	#Range: 0.1 ~ 10000.0
+	nightSpeedMinutes = 10.0
+	#Determines which method is used to set day and night speed.
+	#RATIO: Uses daySpeed and nightSpeed settings.
+	#MINUTES: Uses daySpeedMinutes and nightSpeedMinutes settings.
+	#REALTIME: Sets day and night to 12 real-world hours each.
+	#Allowed Values: RATIO, MINUTES, REALTIME
+	speedMethod = "RATIO"
+	#The time to start day. This is configurable within the time the sun appears and day starts.
+	#Default: 23500
+	#Range: 22300.0 ~ 24000.0
+	dayStart = 23500.0
+	#The time to start night. This is configurable within the time sunset starts and night starts.
+	#Default: 12500
+	#Range: 12000.0 ~ 13000.0
+	nightStart = 12500.0
+	#Enabling this will allow the setting of an infinite amount of time speeds defined as pairs in the form:
+	#(currentTick, desiredSpeed)
+	#where between each value bezier spline interpolation is performed for smooth transitioning
+	#The two default pairs at 0 and 24000 are necessary as they act as bounds. However 
+	#The time speed value for each of them can be freely modified
+	enableInterpolatedTime = false
+	#The value that determines the smoothing factor in the interpolation algorithm.
+	#A high value will make the interpolation softer and curvier
+	#A low value will make the interpolation closer to a piecewise function
+	#Range: 0.0 ~ 10.0
+	interpolatedTimeSmoothingFactor = 0.25
+	#These are the pairs that define what speed time should run at, at the specified day/night tick
+	#The two default pairs need to exist, but their time speed values can be modified
+	interpolatedTimeList = ["0,1.0", "24000,1.0"]
+
+	[time.effects]
+		#When applied, this effect syncs the passage of weather with the current speed of time.
+		#I.e., as time moves faster, rain stops faster. Clear weather is not affected.
+		#When set to SLEEPING, this effect only applies when at least one player is sleeping in a dimension.
+		#Note: This setting is not applicable if game rule doWeatherCycle is false.
+		#Allowed Values: NEVER, ALWAYS, SLEEPING
+		weatherEffect = "SLEEPING"
+		#When applied, this effect syncs the random tick speed with the current speed of time, forcing
+		#crop, tree, and grass growth to occur at baseRandomTickSpeed multiplied by the current time-speed.
+		#When set to SLEEPING, randomTickSpeed is set to baseRandomTickSpeed unless at least one player is sleeping in a dimension.
+		#More information on the effects of random tick speed can be found here: https://minecraft.wiki/w/Tick#Random_tick
+		#WARNING: This setting overwrites the randomTickSpeed game rule. To modify the base random tick speed,
+		#use the baseRandomTickSpeed setting instead of changing the game rule directly.
+		#This effect has a minimum randomTickSpeed of 1 if time speed is less than 1.0.
+		#Allowed Values: NEVER, ALWAYS, SLEEPING
+		randomTickEffect = "SLEEPING"
+		#The base random tick speed used by the randomTickEffect time effect.
+		#Range: > 0
+		baseRandomTickSpeed = 3
+		#When applied, this effect progresses potion effects to match the rate of the current time-speed.
+		#This effect does not apply if time speed is 1.0 or less.
+		#THIS MAY HAVE A NEGATIVE IMPACT ON PERFORMANCE IN SERVERS WITH MANY PLAYERS.
+		#When set to ALWAYS, this effect applies to all players in the dimension, day or night.
+		#When set to SLEEPING, this effect only applies to players who are sleeping.
+		#Allowed Values: NEVER, ALWAYS, SLEEPING
+		potionEffect = "SLEEPING"
+		#When applied, this effect progresses player hunger effects to match the rate of the current time-speed.
+		#This results in faster healing when food level is full, and faster harm when food level is too low.
+		#This effect does not apply if time speed is 1.0 or less.
+		#When set to ALWAYS, this effect applies to all players in the dimension, day or night. Not recommended on higher difficulty settings
+		#When set to SLEEPING, this effect only applies to players who are sleeping.
+		#Allowed Values: NEVER, ALWAYS, SLEEPING
+		hungerEffect = "SLEEPING"
+		#When applied, this effect progresses block entities like furnaces, hoppers, and spawners to match the rate of the current time-speed.
+		#WARNING: This time-effect has a significant impact on performance.
+		#This effect does not apply if time speed is 1.0 or less.
+		#When set to SLEEPING, this effect only applies when at least one player is sleeping in a dimension.
+		#Allowed Values: NEVER, ALWAYS, SLEEPING
+		blockEntityEffect = "SLEEPING"
+
+[sleep]
+	#Enables or disables the sleep feature of this mod. Enabling this setting will modify the vanilla sleep functionality
+	#and may conflict with other sleep mods. If disabled, all settings in the sleep section will not apply.
+	enableSleepFeature = true
+	### THIS SETTING DEFINES THE SLEEP TIME-SPEED IN SINGLE-PLAYER GAMES ###
+	#The maximum speed at which time passes when all players are sleeping.
+	#A value of 110 is nearly equal to the time it takes to sleep in vanilla.
+	#Range: 0.0 ~ 24000.0
+	sleepSpeedMax = 16.0
+	#The minimum speed at which time passes when only 1 player is sleeping in a full server.
+	#Range: 0.0 ~ 24000.0
+	sleepSpeedMin = 1.0
+	#The speed at which time passes when all players are sleeping.
+	#Set to -1 to disable this feature (sleepSpeedMax will be used when all players are sleeping).
+	#Range: -1.0 ~ 24000.0
+	sleepSpeedAll = -1.0
+	#This parameter defines the curvature of the interpolation function that translates the sleeping player percentage into time-speed.
+	#The function used is a Normalized Tunable Sigmoid Function.
+	#A value of 0.5 represents a linear relationship.
+	#Smaller values bend the curve toward the X axis, while greater values bend it toward the Y axis.
+	#This graph may be used as a reference for tuning the curve: https://www.desmos.com/calculator/w8gntxzfow
+	#Credit to Dino Dini for the function: https://dinodini.wordpress.com/2010/04/05/normalized-tunable-sigmoid-functions/
+	#Credit to SmoothSleep for the idea: https://www.spigotmc.org/resources/smoothsleep.32043/
+	#Range: 0.0 ~ 1.0
+	sleepSpeedCurve = 0.3
+	#Set to 'true' for the weather to clear when players wake up in the morning as it does in vanilla.
+	#Set to 'false' to force weather to pass naturally. Adds realism when accelerateWeather is enabled.
+	#Note: This setting is ignored if game rule doWeatherCycle is false.
+	clearWeatherOnWake = true
+	#When true, players are allowed to sleep at all times of day in dimensions controlled by Better Days.
+	#Note: Other mods may override this ability.
+	allowDaySleep = false
+	#When true, a clock is displayed in the sleep interface.
+	displayBedClock = true
+	#The ratio of players in a dimension that must be sleeping to skip to morning.
+	#A value of 1 means all players must be sleeping, 0.5 means half the players must be sleeping, etc.
+	#A value of 0 effectively disables this feature.
+	#Range: 0.0 ~ 1.0
+	ratioPlayersForSleep = 0.0
+
+	#This section defines settings for notification messages.
+	#All messages support Minecraft formatting codes (https://minecraft.wiki/w/Formatting_codes).
+	#All messages have variables that can be inserted using the following format: ${variableName}
+	#The type option controls where the message appears:
+	#	SYSTEM: Appears as a message in the chat. (e.g., "Respawn point set")
+	#	GAME_INFO: Game information that appears above the hotbar (e.g., "You may not rest now, the bed is too far away").
+	#The target option controls to whom the message is sent:
+	#	ALL: Sends the message to all players on the server.
+	#	DIMENSION: Sends the message to all players in the current dimension.
+	#	SLEEPING: Sends the message to all players in the current dimension who are sleeping.
+	[sleep.messages]
+
+		#This message is sent after a sleep cycle has completed.
+		[sleep.messages.morning]
+			#Available variables:
+			#sleepingPlayers -> the number of players in the current dimension who were sleeping.
+			#totalPlayers -> the number of players in the current dimension (spectators are not counted).
+			#sleepingPercentage -> the percentage of players in the current dimension who were sleeping (does not include % symbol).
+			message = "§e§oGood Morning!"
+			#Sets where this message appears.
+			#Allowed Values: SYSTEM, GAME_INFO
+			type = "GAME_INFO"
+			#Sets to whom this message is sent.
+			#A target of 'SLEEPING' will send the message to all players who just woke up.
+			#Allowed Values: ALL, DIMENSION, SLEEPING
+			target = "DIMENSION"
+
+		#This message is sent when a player enters their bed.
+		[sleep.messages.enterBed]
+			#Available variables:
+			#player -> the player who started sleeping.
+			#sleepingPlayers -> the number of players in the current dimension who are sleeping.
+			#totalPlayers -> the number of players in the current dimension (spectators are not counted).
+			#sleepingPercentage -> the percentage of players in the current dimension who are sleeping (does not include % symbol).
+			message = "${player} is now sleeping. [${sleepingPlayers}/${totalPlayers}]"
+			#Sets where this message appears.
+			#Allowed Values: SYSTEM, GAME_INFO
+			type = "GAME_INFO"
+			#Sets to whom this message is sent.
+			#Allowed Values: ALL, DIMENSION, SLEEPING
+			target = "DIMENSION"
+
+		#This message is sent when a player leaves their bed (without being woken up naturally by morning).
+		[sleep.messages.leaveBed]
+			#Available variables:
+			#player -> the player who left their bed.
+			#sleepingPlayers -> the number of players in the current dimension who are sleeping.
+			#totalPlayers -> the number of players in the current dimension (spectators are not counted).
+			#sleepingPercentage -> the percentage of players in the current dimension who are sleeping (does not include % symbol).
+			message = "${player} has left their bed. [${sleepingPlayers}/${totalPlayers}]"
+			#Sets where this message appears.
+			#Allowed Values: SYSTEM, GAME_INFO
+			type = "GAME_INFO"
+			#Sets to whom this message is sent. 
+			#Allowed Values: ALL, DIMENSION, SLEEPING
+			target = "DIMENSION"
+

configureddefaults/config/map_atlases-common.toml

@@ -23,7 +23,7 @@
 	#Marker id associated with the red pin button on the atlas screen. Set to empty string to disable
 	pin_marked_id = "map_atlases:pin"
 	#Shows light color on maps. Needs Moonlight lib
-	light_map = false
+	light_map = true
 	#Show nearby mobs on minimap. Needs matching client config also set
 	mob_radar = false
 	#Adds a shear button to the atlas screen which allows you to cut maps

pakku-lock.json

@@ -5929,6 +5929,74 @@
                 }
             ]
         },
+        {
+            "pakku_id": "Fxeb9slq2LyBuGJd",
+            "pakku_links": [
+                "K3hLdnX1Uz0LGCYC"
+            ],
+            "type": "MOD",
+            "side": "CLIENT",
+            "slug": {
+                "curseforge": "stylish-effects",
+                "modrinth": "stylish-effects"
+            },
+            "name": {
+                "curseforge": "Stylish Effects",
+                "modrinth": "Stylish Effects"
+            },
+            "id": {
+                "curseforge": "543661",
+                "modrinth": "onDuQF5e"
+            },
+            "files": [
+                {
+                    "type": "curseforge",
+                    "file_name": "StylishEffects-v8.0.2-1.20.1-Forge.jar",
+                    "mc_versions": [
+                        "1.20.1"
+                    ],
+                    "loaders": [
+                        "forge"
+                    ],
+                    "release_type": "release",
+                    "url": "https://edge.forgecdn.net/files/5096/987/StylishEffects-v8.0.2-1.20.1-Forge.jar",
+                    "id": "5096987",
+                    "parent_id": "543661",
+                    "hashes": {
+                        "sha1": "90f812020dcbbd854d4e3bab25237250f2e5f84e",
+                        "md5": "9a3369924bc9461e97aec8c9ab769b37"
+                    },
+                    "required_dependencies": [
+                        "495476"
+                    ],
+                    "size": 127246,
+                    "date_published": "2024-02-10T19:54:26.983Z"
+                },
+                {
+                    "type": "modrinth",
+                    "file_name": "StylishEffects-v8.0.2-1.20.1-Forge.jar",
+                    "mc_versions": [
+                        "1.20.1"
+                    ],
+                    "loaders": [
+                        "forge"
+                    ],
+                    "release_type": "release",
+                    "url": "https://cdn.modrinth.com/data/onDuQF5e/versions/riXnUJMs/StylishEffects-v8.0.2-1.20.1-Forge.jar",
+                    "id": "riXnUJMs",
+                    "parent_id": "onDuQF5e",
+                    "hashes": {
+                        "sha512": "43824e71075cffdb5e25d085cb485128cc298c18d6086e7caa744a37e476db2d197baf48cef446939daed76c85c063f3e2557f865eb46636ba3b48492b4925c6",
+                        "sha1": "90f812020dcbbd854d4e3bab25237250f2e5f84e"
+                    },
+                    "required_dependencies": [
+                        "QAGBst4M"
+                    ],
+                    "size": 127246,
+                    "date_published": "2024-02-10T19:54:31.148527Z"
+                }
+            ]
+        },
         {
             "pakku_id": "PIR4FG2NYA0KQ8hV",
             "pakku_links": [